02 Overview
Three brands, all grades, and enough stock that a slab pour does not stall halfway. We supply ACC, UltraTech and Bharathi in OPC 53, OPC 43 and PPC — by the bag over the counter, or by the full load delivered to site.
02 Range
Cement we stock
OPC 53 grade
Highest early strength. Use for structural RCC — columns, beams, slabs — and anywhere the formwork has to come off quickly.
IS 269 · 53 MPa at 28 days Get priceOPC 43 grade
General-purpose ordinary Portland. Plastering, masonry, non-structural concrete and flooring work.
IS 269 · 43 MPa at 28 days Get pricePPC — Portland Pozzolana
Slower early gain, higher long-term strength, less heat during setting and a finer finish. Better for plaster, masonry and mass concrete in hot weather.
IS 1489 · fly-ash blended Get priceWhite cement & wall putty
White cement for joint filling and decorative work, plus wall putty for the smooth base coat under paint.
Finishing grades Get priceReady mix plaster & tile adhesive
Pre-blended plaster and tile adhesive where consistency matters more than the rate per bag.
Bagged dry mix Get priceNeed a rate for Cement?
Send the sizes and quantities. We confirm stock and quote the current rate with a stated validity.
03 Reference
Sizes & weights
The charts we quote from. Standard values — confirm the exact section and grade before ordering.
Cement grade selection guide
Reference| Grade | Standard | 28-day strength | Best used for |
|---|---|---|---|
| OPC 53 | IS 269 | 53 MPa | RCC columns, beams, slabs, precast, fast form-stripping |
| OPC 43 | IS 269 | 43 MPa | General concrete, flooring, masonry, plaster |
| PPC | IS 1489 | 33 MPa min, gains further | Plaster, masonry, mass concrete, hot-weather pours |
| PSC | IS 455 | Slow gain, high durability | Marine and sulphate-exposed work near the coast |
A standard 50 kg bag is 0.0347 m³ loose volume — roughly 1¼ cubic feet. Nominal mixes: M15 is 1:2:4, M20 is 1:1.5:3, M25 is 1:1:2 by volume. For anything structural, use the mix your engineer specified, not the one the mason remembers.
04 Brands
Cement brands we supply
05 FAQ
Cement — your questions
OPC or PPC — which cement should I buy?
OPC 53 for structural RCC where you need strength fast. PPC for plaster, masonry and mass concrete — it works more smoothly, generates less heat and keeps gaining strength for months. Many houses here sensibly use both: OPC for the slab, PPC for the walls and plaster.
How many cement bags per cubic metre of concrete?
Roughly 6.3 bags for M15, 8 bags for M20 and 9.5 bags for M25 at nominal mix, before wastage. Use our cement estimator for your actual slab dimensions.
Do you deliver full truck loads?
Yes, across Sirsi, Siddapur, Yellapur, Banavasi, Mundgod and down to the Kumta and Honnavar belt. Send the quantity and the site location on WhatsApp and we will confirm the load and rate.
How should cement be stored on site?
Off the floor on planks, away from outside walls, covered, and used within about 3 months of the bag date. In this humidity a bag left on bare ground will lump within weeks.
06 Also available
Other categories
— Get started
Build strong. Build with Sunti Steels.
Quality materials, trusted brands and reliable supply — from one counter in Sirsi, delivered across Uttara Kannada.